No info about this. It's not from a film or anything, just from the minds at Pegasus. Having built a couple of their other kits, I'm expecting small fit issues and a fair bit if sanding and filling.
Box and sprues
Lee's Pegasus 1/350 "The Cosmostrator"
Moderator: T3hGuppy
Lee's Pegasus 1/350 "The Cosmostrator"
This kit has been in my stash for years. And only just getting back to modelling after a looong hiatus this and the Pocher 1/8 Lamborghini should ease me back into it.
No info about this. It's not from a film or anything, just from the minds at Pegasus. Having built a couple of their other kits, I'm expecting small fit issues and a fair bit if sanding and filling.
Box and sprues
No info about this. It's not from a film or anything, just from the minds at Pegasus. Having built a couple of their other kits, I'm expecting small fit issues and a fair bit if sanding and filling.
Box and sprues
Where does all the bloody time go.....?
Re: Lee's Pegasus 1/350 "The Cosmostrator"
So, off and away with it. Managed to get a couple of hours spare today.....
Only three sprues with three lots of mirrored parts and the main fuselage.
Got the fuselage together. quite a bit of sanding was needed, but no filling.
Nacelles all together and much more sanding with some very light filling.
And a little problem with the "light". Doesn't fit into the housing, but nothing a snip and sand can't sort out...
Possibly another update later
Only three sprues with three lots of mirrored parts and the main fuselage.
Got the fuselage together. quite a bit of sanding was needed, but no filling.
Nacelles all together and much more sanding with some very light filling.
And a little problem with the "light". Doesn't fit into the housing, but nothing a snip and sand can't sort out...
Possibly another update later
Where does all the bloody time go.....?
Re: Lee's Pegasus 1/350 "The Cosmostrator"
That's a neat looking kit for getting back into things Lee - are you planning on a vignette for it at all? 
Cheers, Neil
On the Bench:
Revell 1/72 Millennium Falcon
Tamiya 1/48 P-38F/G
On the Bench:
Revell 1/72 Millennium Falcon
Tamiya 1/48 P-38F/G
Re: Lee's Pegasus 1/350 "The Cosmostrator"
An awesome looking subject, glad to see you moving along at a nice clip. I'll have a seat, and welcome to the build, Lee!
Backlog Progress: |||||||||||||||-------|----------|----------| 26/80
On the bench: Hasegawa 1/72 Tatiana's Vanship
Last Completed: Bandai HGUC Geara Zulu // Hasegawa 1/48 J2M3Raiden Prisoner of War
On the bench: Hasegawa 1/72 Tatiana's Vanship
Last Completed: Bandai HGUC Geara Zulu // Hasegawa 1/48 J2M3Raiden Prisoner of War
-
TheSmoo
- Sergeant First Class
- Posts: 270
- Joined: Mon Dec 07, 2015 11:01 pm
- Location: Bonnie Scotland
- Contact:
Re: Lee's Pegasus 1/350 "The Cosmostrator"
cool looking little kit, i noted the hollowed out sponge for it to rest on when it was clamped and the glue was drying so thats a neat trick to add to the memory bank, what is the adjustable metal holder thing though that looks interesting?
Re: Lee's Pegasus 1/350 "The Cosmostrator"
I always loved the shape of that ship since you showed it Lee! I will be watching this as I do all the rest. So cool, this is so much fun!
Oh, Hmmm and it is from a film Lee. Its the ship from "First Spaceship On Venus (1960)"
I do love science fiction, its in my blood, but now I dont remember half of it! haha!
Yea, when you put it up in the Guidelines, I keep looking at it saying (I know Ive seen that ship) I think I spent a quite while looking through hundreds of "SpaceShips", "StarShips", etc haha, must of ran dozens of pictures of SW, Trek and Alien and so on, and then found it!I dont think this was a very popular movie, but by itself, it is a very cool ship.
Oh, Hmmm and it is from a film Lee. Its the ship from "First Spaceship On Venus (1960)"
I do love science fiction, its in my blood, but now I dont remember half of it! haha!
Yea, when you put it up in the Guidelines, I keep looking at it saying (I know Ive seen that ship) I think I spent a quite while looking through hundreds of "SpaceShips", "StarShips", etc haha, must of ran dozens of pictures of SW, Trek and Alien and so on, and then found it!I dont think this was a very popular movie, but by itself, it is a very cool ship.
-Doc
On the bench:
On the bench:
Re: Lee's Pegasus 1/350 "The Cosmostrator"
I may do - It just depends on time really
Cheers dude
Hey bud, it's a dinner plate holder from Ikea. It opens out and is great for holding all the sprues whilst building. Keeps them all neat and manageable
Awesome! Going to go look for that film right now - CheersSaturn5tony wrote: ↑Sat Jun 10, 2017 6:56 pm I always loved the shape of that ship since you showed it Lee! I will be watching this as I do all the rest. So cool, this is so much fun!
Oh, Hmmm and it is from a film Lee. Its the ship from "First Spaceship On Venus (1960)"
I do love science fiction, its in my blood, but now I dont remember half of it! haha!
Yea, when you put it up in the Guidelines, I keep looking at it saying (I know Ive seen that ship) I think I spent a quite while looking through hundreds of "SpaceShips", "StarShips", etc haha, must of ran dozens of pictures of SW, Trek and Alien and so on, and then found it!I dont think this was a very popular movie, but by itself, it is a very cool ship.
Where does all the bloody time go.....?
Re: Lee's Pegasus 1/350 "The Cosmostrator"
Nice little pack of space dogs....lol
Getting there...
My white lines go a long way, either up your nose or into your models....
Getting there...
My white lines go a long way, either up your nose or into your models....
Where does all the bloody time go.....?
Re: Lee's Pegasus 1/350 "The Cosmostrator"
Final one for today.
As expected, much filling and sanding, but nearly ready for paint!
As expected, much filling and sanding, but nearly ready for paint!
Where does all the bloody time go.....?
Re: Lee's Pegasus 1/350 "The Cosmostrator"
Got up early to do this - Mojo returned...!!!
Second layer of filling in and pointy bits added. May still need to blend the pointy bits in a bit before paint though...
Second layer of filling in and pointy bits added. May still need to blend the pointy bits in a bit before paint though...
Where does all the bloody time go.....?
Re: Lee's Pegasus 1/350 "The Cosmostrator"
Looks good mate you going for alclads on this one? 
On the Bench...
1/35 TAKOM Mark. IV Heavy Battle tank
1/35 TAKOM Mark. IV Heavy Battle tank
Re: Lee's Pegasus 1/350 "The Cosmostrator"
Cheers - I had planned to, but not sure whether to try something else. Will make up my mind tomorrow, once all the putty is dry
Where does all the bloody time go.....?
-
DBMiller
- Chief Warrant Officer 3
- Posts: 2229
- Joined: Mon Jan 06, 2014 8:10 pm
- Location: Guilford, Vermont, USA
Re: Lee's Pegasus 1/350 "The Cosmostrator"
I saw most of it on Mystery Science Theater 3000.
[youtube]eZp-ieqJaaM[/youtube]
[youtube]eZp-ieqJaaM[/youtube]
Re: Lee's Pegasus 1/350 "The Cosmostrator"
That's the one! Oooo loved that ship when it landed..so cool, so cool!
-Doc
On the bench:
On the bench:
Re: Lee's Pegasus 1/350 "The Cosmostrator"
First base coat down. Gloss black next.....
Where does all the bloody time go.....?
Re: Lee's Pegasus 1/350 "The Cosmostrator"
Oh that looks great Lee,
so funny is that I can see Darth, looking at it out of the corner of his eye saying "Hmm if I had that ship, I could have kicked (eeessss....sheee) the heck out of skywalkers xwing that day!" hehe
-Doc
On the bench:
On the bench:
Re: Lee's Pegasus 1/350 "The Cosmostrator"
He has has good days and bad days against rebels.
Backlog Progress: |||||||||||||||-------|----------|----------| 26/80
On the bench: Hasegawa 1/72 Tatiana's Vanship
Last Completed: Bandai HGUC Geara Zulu // Hasegawa 1/48 J2M3Raiden Prisoner of War
On the bench: Hasegawa 1/72 Tatiana's Vanship
Last Completed: Bandai HGUC Geara Zulu // Hasegawa 1/48 J2M3Raiden Prisoner of War
-
Twokidsnosleep
- General
- Posts: 18142
- Joined: Thu Aug 07, 2014 4:07 pm
- Location: BC,Canada
Re: Lee's Pegasus 1/350 "The Cosmostrator"
Good to see you building again
I need you to come over and organize my model spaces...you seem to have the knack at it after yearly yearnings to do so
I need you to come over and organize my model spaces...you seem to have the knack at it after yearly yearnings to do so
Scott
On, Under or near the desk
Brewster Buffalo ..buddy build
Rockford Firebird
1/72 Black Pearl Pirate Ship in dry dock
On, Under or near the desk
Brewster Buffalo ..buddy build
Rockford Firebird
1/72 Black Pearl Pirate Ship in dry dock
Re: Lee's Pegasus 1/350 "The Cosmostrator"
lol yeah, although it's getting a little tedious now...Twokidsnosleep wrote: ↑Mon Jun 12, 2017 5:28 pm Good to see you building again
I need you to come over and organize my model spaces...you seem to have the knack at it after yearly yearnings to do so
Where does all the bloody time go.....?
Re: Lee's Pegasus 1/350 "The Cosmostrator"
That's coming along really nicely Lee - you're in danger of finishing first!
Cheers, Neil
On the Bench:
Revell 1/72 Millennium Falcon
Tamiya 1/48 P-38F/G
On the Bench:
Revell 1/72 Millennium Falcon
Tamiya 1/48 P-38F/G
Re: Lee's Pegasus 1/350 "The Cosmostrator"
No threat of that, I'm away again at the moment
Where does all the bloody time go.....?
-
privatepete
- First Lieutenant
- Posts: 3871
- Joined: Thu Dec 11, 2014 1:13 pm
Re: Lee's Pegasus 1/350 "The Cosmostrator"
Hi Lee you didn't hang around, looking good, good luck with the rest of the build
Re: Lee's Pegasus 1/350 "The Cosmostrator"
You've obviously not seen how slowly some of us build (or even get started
)Safe Travels
Cheers, Neil
On the Bench:
Revell 1/72 Millennium Falcon
Tamiya 1/48 P-38F/G
On the Bench:
Revell 1/72 Millennium Falcon
Tamiya 1/48 P-38F/G
Re: Lee's Pegasus 1/350 "The Cosmostrator"
Very cool Lee
I expect you are using Ultimate gloss? be interested in how the chrome goes over it
I expect you are using Ultimate gloss? be interested in how the chrome goes over it
Cheers Gav
On The Bench OK where do I start
On The Bench OK where do I start
Re: Lee's Pegasus 1/350 "The Cosmostrator"
I've not started yet and it's my SiG
Well, it belongs to all of us, but you know what I mean.
Backlog Progress: |||||||||||||||-------|----------|----------| 26/80
On the bench: Hasegawa 1/72 Tatiana's Vanship
Last Completed: Bandai HGUC Geara Zulu // Hasegawa 1/48 J2M3Raiden Prisoner of War
On the bench: Hasegawa 1/72 Tatiana's Vanship
Last Completed: Bandai HGUC Geara Zulu // Hasegawa 1/48 J2M3Raiden Prisoner of War
Re: Lee's Pegasus 1/350 "The Cosmostrator"
Yea Im kind of in third gear myself with the naboo. Been workin on the other ... plane...
-Doc
On the bench:
On the bench:
Re: Lee's Pegasus 1/350 "The Cosmostrator"
Yeah I think we were in a race to be last and then I caved in and started!
Cheers, Neil
On the Bench:
Revell 1/72 Millennium Falcon
Tamiya 1/48 P-38F/G
On the Bench:
Revell 1/72 Millennium Falcon
Tamiya 1/48 P-38F/G
Re: Lee's Pegasus 1/350 "The Cosmostrator"
Hi there, hope all is well.
Good news! The deadline has been extended to midnight GMT October 31! Get building!
Good news! The deadline has been extended to midnight GMT October 31! Get building!
Backlog Progress: |||||||||||||||-------|----------|----------| 26/80
On the bench: Hasegawa 1/72 Tatiana's Vanship
Last Completed: Bandai HGUC Geara Zulu // Hasegawa 1/48 J2M3Raiden Prisoner of War
On the bench: Hasegawa 1/72 Tatiana's Vanship
Last Completed: Bandai HGUC Geara Zulu // Hasegawa 1/48 J2M3Raiden Prisoner of War
